Local IP Addresses for TV System Components
Below, you’ll find the IP addresses for TV system components, which allow local access for configuration and troubleshooting.
Local IP Assignments
• NACE COM – 192.168.3.18
• NACE 1st NTSC 32 – 192.168.0.136
• NACE 2nd NTSC 32 – 192.168.0.137
• DSI COM – 192.168.3.18
Please ensure you are using the correct IP address when working with the system. If you need further assistance, reach out to support.
Related Articles
EmpireTV TV Completely Down Troubleshooting Checklist
TV Completely Down Troubleshooting Checklist When all TVs in your facility are completely down (no picture, not even a blurry image), follow this troubleshooting guide: 1. Check for Nonpayment • A very common reason for a complete TV outage is ...
Updating Channels on a COM3000 and PARS NTSC 32s
In this video, we’ll walk you through the process of setting up and updating channels on a COM3000 and PARS NTSC 32s. For the IP configuration of the gateways mentioned in this video, please refer to the following article: Local IP Addresses for TV ...
How to Power Cycle Your COM 3000 TV Rack
Power cycling your COM 300 TV rack is quite simple. Just press the power button at the bottom of the unit—this will turn off all components on the rack, as shown below. Wait 10 seconds, then turn it back on.
Understanding Why TV Providers Can Increase Rates Mid-Contract
At EmpireTV, we strive to provide our customers with transparent and reliable television services. However, some customers may wonder why their TV service costs can increase even while they are still under contract. The answer lies in the way TV ...
EmpireTV How to Scan Your TV for Channels
If you’re missing channels or setting up your TV for the first time, scanning your TV for channels is a quick and simple solution. Follow the steps below to complete the process and start watching your favorite shows in no time. 1. Find Your Remote: ...